2 IN 1 Ozone Skin Rejuvenation Spot Removal Plasma Pen
2 IN 1 Ozone Skin Rejuvenation Spot Removal Plasma Pen
What is Plasma?The Plasma Pen, also known as Plasma Lift Skin Tightening or Fibroblast Tightening, is a non-surgical device and technique that is used to tighten and smooth skin naturally. This device has been popular for many years in Europe and is now starting to gain traction in the United States for skin rejuvenation.
This device is used to perform Fibroblast Therapy, which is a technique used to stimulate the production of collagen in the skin. This promotes natural healing and rejuvenates the appearance of the skin.
This device is used to perform Fibroblast Therapy, which is a technique used to stimulate the production of collagen in the skin. This promotes natural healing and rejuvenates the appearance of the skin.
Work principle:
Similar to carbon dioxide (CO2) laser beauty machine, it uses new generation of plasma micro district discharge technology with low temperature and high frequency , whichis efficient capacity conversion material and chip control . when the needle touch the freckle skin,it produce plasma with high temperature as 2000 ℃ immediately, and carbonize the spot freckle , then remove it.
When the needle touch the freckle spot ,it will produce a small flame,which is different from common flame.The micro vascular will be solidified quickly without bleeding during the treatment.Then it will form carbon scabs ,protect wound skin from infection. After about 1 week, scab will shed without scar.
How Does Plasma Skin Tightening Work ?
The tip of the pen creates a plasma energy arc which is then transferred from the tip of the needle to the surface of the skin. The tissues of the skin are sublimated, or modified, during treatment. The treatment is extremely precise, meaning that the tissues surrounding the area of treatment remain untouched and intact. This results in the tightening of the skin in the desired area. As a result of this, excess skin is reduced and the remaining skin is toned, tightened, and the wrinkles are reduced.
This method of skin resurfacing creates a controlled skin damage, which activates the normal skin-healing process. This process leads to skin remodeling, which then improves various signs of aging.
Unlike other methods of skin ablation, there are no open wounds during the healing phase. Therefore, there is minimal risk of scarring, infection or loss of pigmentation.
Plasma Skin Resurfacing Results ?
In most cases, initial results are visible immediately after treatment. In the first stages of healing, small dry spots called echars form on the skin and remain there for about a week before falling off. This is normal and temporary. Because the treatment stimulates the natural body healing process, it typically takes eight weeks to see the full benefits of the treatment.
The tip of the pen creates a plasma energy arc which is then transferred from the tip of the needle to the surface of the skin. The tissues of the skin are sublimated, or modified, during treatment. The treatment is extremely precise, meaning that the tissues surrounding the area of treatment remain untouched and intact. This results in the tightening of the skin in the desired area. As a result of this, excess skin is reduced and the remaining skin is toned, tightened, and the wrinkles are reduced.
This method of skin resurfacing creates a controlled skin damage, which activates the normal skin-healing process. This process leads to skin remodeling, which then improves various signs of aging.
Unlike other methods of skin ablation, there are no open wounds during the healing phase. Therefore, there is minimal risk of scarring, infection or loss of pigmentation.
Plasma Skin Resurfacing Results ?
In most cases, initial results are visible immediately after treatment. In the first stages of healing, small dry spots called echars form on the skin and remain there for about a week before falling off. This is normal and temporary. Because the treatment stimulates the natural body healing process, it typically takes eight weeks to see the full benefits of the treatment.
Description:
This machine offers the beautician and esthetician the ability to enter into the advanced treaements that only plasma technology can offer. The machine is capable of
.Clearing Active Acne
.Skin Lifting
.Skin tighening
.Skin Resurfacing
.Removal of small skin tags
.Skin rejuvenation
All in one machine.
Application
Skin spot, pigment, skin tag, skin pore, moles, wart, scar, rejuvenation and wrinkle
Removal of spots
Move the needle slightly towards the spot and it can be very clear that the melanin is burnt and falls off after the electric needle sweeps over it, and if the spots are shallow and the area is small, they can be removed all in one go. If it is a larger area and the pigmentation is darker, it will take 2 or 3 attempts to remove it. We should also refer to your beautician when using electric needle treatment, not only should we keep the customers still, the beautician should balance the her hand with the electric needle and not shake to prevent burns, inconsistency, and to assist in the healing of wounds post-treatment.
Removal of moles
Be wary to distinguish the mole extent when removing the mole, some moles grow on the surface of the skin and the root grows in the deep skin tissue. Do not break the surface of the mole all at once when using an electric needle, it's best to use a small square area for burning. If there is a deeper mole, not only to avoid inflammation after processing, it's best to apply a nutrient cream acting like living cells 2-3 days before the wound is healed. This prevents dents in the skin. When applying the nutrient cream, you should pay attention to the wound and it should not suffer from inflammation, if it does, then do not wipe it.
Removal of granulation tissue
Connect the granulation component with the electric needle port and burn the root cells of the granulation with the laser needle. After about a week, the granulation will fall off on its own. If the granulation is small, the granulation can be removed in one go using the laser needle. If the granulation is large, it should be burned several times, so as not to affect the healing of the wound.
Removal of tattoos
In general, the area of tattoo removal is larger. It should be used with a large sized needle. The method of removing tattoo is the same as removing spots. The operation time may be slightly longer, and for tattoos with larger area (more than 3 cm). It should be processed multiple times, and must not be completed all at once. Otherwise, this will result in bacterial infection if you are not careful. This being said, if you're not careful with the bacterial infection, the results can be really bad. The beautician and the customer should be very careful, and if you have severe inflammation, you should consult a health practitioner as soon as possible.
Technical parameters
| Parameters | |
| Item Name: | 2 IN 1 Ozone Skin Rejuvenation Spot Removal Plasma Pen |
| Model #: | AFL-PA102 |
| Color: | White |
| Functions: | Face Lifting & Mole Removal |
| Voltage: | AC 110V-240V 50/60Hz |
| Working Frequency: | 100KHZ |
| Power Output: | 10W max. |
| Battery | Rechargeable li-polymer battery 2x3.7v/1000mAH |
| Output Volt./Amp | 12V/1.5A |
| Screen | LCD |
| Energy Level | 1 - 8 Levels |
| Mode: | OZONE/SPOT |
| Certification: | CE, RoHs |
| Package Size (LxWxH): | 31cm x 25cm x 8cm |
| Gross Weight: | 1.3 KGS |
Before and After:
About us:
Hangzhou Arfurla S&T Development Co.,Ltd, we have been developing beauty and medical devices since 2004, the professional manufacturer approved Medical CE0197,ISO 9001:2008,ISO 13485:2003 and FDA/510(k) approved.
Our European CE Medical Certificates point out our doctrine witch is: "Quality takes top priority and customer focus"
Our expertise in Intense Pulsed light technology provided us with the knowledge to develop solutions that answer the needs of today’s clients.
Q1: Delivery Methods
We can offer the door to door service by air or by sea, just depend on your actual request. Such as DHL, UPS, TNT, FEDEX...by air; and the sea transportations to all over the world, including: America, Canada, Brazil, Russia, Mexico etc...
Q2: Delivery Time
After we get the payment within 3-5 working days
Q3: After Sale Service or Technology Supports
We have a professional technology supporting team for your timely services. We prepare the technical documents for you, also you can contact us by telephone, online chat (googletalk, MSN, skype, yahoo...
Q4: OEM&ODM service
We offer professional services on software & hardware design and production
评论
发表评论